- Supports all Samsung LED model with screen size 40″ 46″ 55″ (Not Make by Samsung)
- Support VESA 400×400
- Low profile wall mount 14.5mm/0.5 inch close to wall and hang like a picture frame.
- Support tv up to 100 lbs
- Standard mounting hardware included.
This wall mount bracket is for LED TVs that need to be mounted as close to the wall as possible and hang like a picture frame, comparable to the name brand solution WMN1000B. With less than 15mm (14.5mm to be exact, yes MILLIMETERS which equates to just 0.57 inches) this is one of the slimmest wall mounting solutions on the market today! Featuring high quality mounting hardware and a “kick-stand” style lever to hold the TV away from the wall while connecting and dis… More >>
Tags: Alternative, LED01, Mount, Samsung, Slim, Ultra, Wall, WMN1000B, World
I mounted successfully my Samsung 40″ LED tv with this kit. It might be a little less fancy than the OEM kit WMN 1000B but who cares? It’s in the back of the tv and it $200,- cheaper.
It is definitely strong enough. The installation is straight forward. It took me less than an hour. Most of that time I spent measuring to have the optimum location for the TV.
I don’t give it 5 stars because the drywall anchors are not as heavy duty as the ones supplied with the OEM kit. However considering the price difference, it’s worth to pick up some heavy duty drywall anchors from the local hardware store.
Rating: 4 / 5
We just used this wall mount for our Samsung 55″ LED TV. As an alternative to the Samsung wall mount that was extremely high priced, we were very pleased with the quality of this product. Much easier and nicer then our standard wall mount that had been used in the past. Highly recommend.
Rating: 5 / 5
I tried this mount out with my 55″ Samsung LED LCD TV. I really wanted to use this slim mount as it was 2 to 3 time cheaper than the Samsung. The aluminum blocks that screw on the wall are of very good quality and simple design that mimics the Samsung version. The supplied wall plaster screw system, two large plastic inserts that fit into the plaster, for my taste are not strong enough to trust hanging your TV on. From my experience these types of plaster inserts do not grip the back of the plaster wall sufficiently to be considered sturdy. The Samsung kit supplies four Hilti plaster board bolt systems which are much more strong. Still I would at least place one of the two aluminum blocks with large wall screws (supplied) directly into an available 2×4″ beam behind the plaster board.
The 1.5″ bolts that fit into the wire part of the mount (two plastic disks joined by a 12″ wire) were used with two 1/2″ plastic spacers. This meant that 0.5″ of bolt would screw into the TV. I noted that the bolt would not be able to fully screw into the TV as there was 0.3″ of space for the bolt. You could use the shorter bolts but I wanted to use the 0.5″ plastic spacers so the TV would have a slight downward tilt to it. I really did not want to tighten these bolts into a 0.9″ thick Samsung TV and find out what could happen if they deformed anything as they tightened. I guess I could have added some larger washers to get the spacing right (none were supplied).
Finally the two plastic parts that fit onto the top of the TV had me worried. The wire part consists of two plastic disks strung together by a plastic coated wire. The black plastic appears to be regular ABS type plastic, hard and perhaps brittle. The wire is held in side the disks by a wire end crimps about 1/4″ wide. This would direct all the weight of the TV on to these two crimps, one on either side of the wire and thus onto the inner side of the plastic disk. This is alot of force to apply continuously to a little area of plastic. For a 40″ LED TV, I feel it would be okay with that degree of stress. For the 55″ TV I hung on the wall, this potential for a crack had me worried. In the end do you really trust a little piece of Chinese plastic to hold your new TV? My examination of the identical mount from Samsung had me really appreciate the construction of the Samsung and worry about the quality of this knock off wall mount. In the end my 55″ is hanging off a Samsung wall mount drilled into one 4×4″ wood stud and one Hilti plaster board mount.
Rating: 1 / 5
Don’t buy the Samsung version of this wall mount. The Samsung is way overpriced for what it is (it’s priced to match the effect of what it does and not the cost of making this product). This wall mount works perfectly fine and is identical to the Samsung one.
Rating: 5 / 5